ASME SA-213 Grade TP 347H Stainless steels
Data updates
This material has 527 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-213 Grade TP 347H Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-213 Grade TP 347H Physical Properties
Temperature
This material has 527 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-213 Grade TP 347H Heat Treatments
- Solution treatment; Austenitizing/Solutioning cold worked temperature min. 1100°C (2000°F); hot rolled temperature min. 1050°C (1925°F).
Cooling Media: water or other rapid cool.
A solution treating temperature above 1065°C (1950°F) may impair resistance to intergranular corrosion after subsequent exposure to sensitizing conditions in the indicated grades. When specified by the purchaser, a lower temperature stabilization or resolution anneal shall be used subsequent to the higher-temperature solution anneal.
ASME SA-213 Grade TP 347H Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-213 Grade TP 347H International Equivalent Materials
Showing 15 of 197 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 197 international equivalents?
See all 197 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 197Cross References
- 8Composition
- 42Mechanical Properties
- 83Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 104Creep
- -Joints
- -Coatings
- 21Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 70Total Suppliers