ASME SA-333 Grade 6 Structural and constructional steels
Data updates
This material has 8925 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASME SA-333 Grade 6 Chemical Composition
ASME Boiler and Pressure Vessel Code An International Code Section II - Part A Ferrous Material Specifications, American Society of Mechanical Engineers, 2025
Looking for full material performance data?
Free registration required • Instant access
ASME SA-333 Grade 6 Physical Properties
Temperature
This material has 8925 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASME SA-333 Grade 6 Heat Treatments
- Normalize by heating to a uniform temperature of not less than 815°C (1500°F) and cool in air or in the cooling chamber of an atmosphere controlled furnace. Normalize, at the discretion of the manufacturer, reheat to a suitable tempering temperature. For the seamless process only, reheat and control hot working and the temperature of the hot-finishing operation to a finishing temperature range from 845 to 945°C (1550 to 1750°F) and cool in air or in a controlled atmosphere furnace from an initial temperature of not less than 845°C (1550°F). Seamless pipe may be heat treated by heating to a uniform temperature of not less than 815°C (1500°F), followed by quenching in liquid and reheating to a suitable tempering temperature.
ASME SA-333 Grade 6 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASME SA-333 Grade 6 International Equivalent Materials
Showing 15 of 86 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 86 international equivalents?
See all 86 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 86Cross References
- 11Composition
- 47Mechanical Properties
- 82Physical Properties
- 1Heat Treatment
- 1Metallography
- -Machinability
- 2Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 72Creep
- 83Joints
- -Coatings
- 3Dimensions
- 1Tribology
- 8491Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 45Total Suppliers