UNI C 36 Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels
Country / Standard: Italy / UNI
Indicative price:

Data updates

Latest Update: 2022-05
Total number of updates: 1
Update History

This material has 94 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI C 36 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.32 – 0.39
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Mn
VALUE
0.50 – 0.90
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
P
VALUE
≤ 0.035
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

UNI 7065: 1972 / Cold rolled flat finished unalloyed steel products. Strips with carbon content between 0.10 and 0.60%

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI C 36 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 210 GPa
Unlock full details
Full data available with free access View Complete Material Data
Density
7.67 — 7.86 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
0.27 — 0.3
Unlock full details
Full data available with free access View Complete Material Data

This material has 94 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI C 36 Heat Treatments

  • Material is normally supplied in the annealed or normalised condition. The values shown in the mechanical properties table apply to the following conditions: TC: Annealed. TD: Normalised. TF: Hardened and tempered. Spheroidised: Spheroidise annealed. Annealed: Annealed to obtain a structure with a controlled hardness. Heat treated: Normalised or hardened and tempered followed by surface hardening followed by stress relieving at 140 to 180°C for one hour (to achieve the minimum surface hardness value specified after flame or induction hardening followed by stress relieving). Anneal at 650 - 700°C. Normalise at 860 - 880°C. Harden from 840 - 880°C and temper at 550 - 660°C for at least 1 hour.
  • Material is normally supplied in the hot rolled condition but, subject to agreement, may be supplied in one of the following conditions: Soft Annealed (SA) to a maximum hardness by annealing at 650 - 700°C. Spheroidise Annealed (Spheroidised). Annealed to obtain a ferritic/pearlite structure (Annealed). Normalized at 860 - 890°C. Hardened and Tempered (H+T). The H+T values shown in the mechanical properties table are obtained from a test piece hardened by water quenching from 840 - 860°C followed by tempering at 550 - 650°C for at least 1 hour. The temperature of the water must be between 15 - 30°C. The Rockwell C Scale hardness minimum value (Heat Treated condition) shown in the mechanical properties table is the surface hardness which must be obtained whether material is in the normalised condition and subsequently surface hardened or whether the material is in the hardened and tempered condition and subsequently surface hardened; Both treatments are followed by tempering at 140-180°C for approximately 1 hour.

UNI C 36 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
≥ 490 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
≥ 141
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
≥ 16 %
Unlock full details
Full data available with free access View Complete Material Data
Impact Energy
val1
Full data available with free access View Complete Material Data
J
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 40Cross References
  • 15Composition
  • 27Mechanical Properties
  • 3Physical Properties
  • 6Heat Treatment
  • -Metallography
  • -Machinability
  • -Stress-Strain
  • -Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 3Total Suppliers