EN 1.4547 Stainless steels

Material group: Ferrous Alloys / Stainless steels

Country/Standard: European Union / EN

Data updates

Latest Update: 2025-11

Total number of updates: 13

Update History

2025-10 2024-03 2021-07 2020-03 2019-09 2017-06 2016-08 2016-05 2015-12 2015-03 2015-02 2014-04

This material has 1112 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

EN 1.4547 Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

≤ 0.020

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

19.5 – 20.5

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

0.50 – 1.00

UNIT

CAS NUMBER

7440-50-8

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-98-7

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7727-37-9; 17778-88-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

EN 10088-2: 2024 / Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes

Looking for full material performance data?

EN 1.4547 Physical Properties

Temperature

0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 215 GPa

Unlock full details

Density

val1 kg/dm³

Unlock full details

Poisson Coefficient

val1

Unlock full details

Thermal Conductivity

14 W/(m∙°C)

Unlock full details

Heat Capacity

val1 J/(kg∙°C)

Unlock full details

Electrical Resistivity

0.85 Ω∙mm²/m

Unlock full details

Electrical Conductivity

val1 S/m

Unlock full details

This material has 1112 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

EN 1.4547 Heat Treatments

Solution annealed (+AT): 1180-1230°C (for guidance only), cooling sufficiently rapid in water or air.
Hot forming: 1200-1000°C, air cooling; Solution annealing (+AT): 1140-1200°C, water or air cooling. If heat treatment is carried out in a continuous furnace, the upper part of the range specified should usually be preferred, or even exceeded. The lower end of the range specified for solution annealing should be aimed at the heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 1020°C for steels with Mo contents exceeding 3 %.

EN 1.4547 Mechanical Properties

Temperature

≤ 0°C 0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Yield Strength, Rp0.2

val1 MPa

Unlock full details

Yield Strength, Rp1

val1 MPa

Unlock full details

Tensile Strength

500 — 2100 MPa

Unlock full details

Elongation, A

15 %

Unlock full details

Impact Energy

val1 J

Unlock full details

Brinell Hardness (HB)

≤ 260

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book a Demo

233 Cross References

160 Composition
375 Mechanical Properties
19 Physical Properties
12 Heat Treatment
- Metallography
- Machinability

25 Stress-Strain
- Formability
- Fatigue
- Fracture
- Creep

14 Joints
- Coatings
153 Dimensions
- Tribology

4 Corrosion
- Ageing
- Weatherability
- Irradiation

117 Total Suppliers