EN E195 Structural and constructional steels
Data updates
This material has 578 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
EN E195 Chemical Composition
EN 10296-1: 2003 / Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubes
Looking for full material performance data?
Free registration required • Instant access
EN E195 Physical Properties
Temperature
This material has 578 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
EN E195 Heat Treatments
- Welded and cold sized (+CR1) - Normally not heat treated, but suitable for final annealing. After annealing or normalizing, the resulting mechanical properties meet the requirements specified for the delivery condition +A or +N, respectively.
Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements. - Welded and cold sized (+CR1) - Normally not heat treated after welding and sizing, but suitable for final annealing or normalizing. After annealing or normalizing, the resulting mechanical properties do not necessarily have to meet the requirements specified for the delivery condition +A or +N.
Soft annealed (+A) - After welding and sizing the tubes are annealed in a controlled atmosphere.
Normalized (+N) - After welding and sizing the tubes are normalized in a controlled atmosphere.
EN E195 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
Optimize material selection for your application - Book a Demo
-
274 Cross References
-
29 Composition
-
43 Mechanical Properties
-
3 Physical Properties
-
2 Heat Treatment
-
- Metallography
-
- Machinability
-
- Stress-Strain
-
- Formability
-
- Fatigue
-
- Fracture
-
- Creep
-
- Joints
-
- Coatings
-
22 Dimensions
-
- Tribology
-
- Corrosion
-
- Ageing
-
- Weatherability
-
- Irradiation
-
205 Total Suppliers