EN X3CrNiCu18-9-4 Stainless steels

Material group: Ferrous Alloys / Stainless steels

Country/Standard: European Union / EN

Data updates

Latest Update: 2024-03

Total number of updates: 6

Update History

2019-09 2018-01 2016-11 2016-08 2015-02

This material has 652 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

EN X3CrNiCu18-9-4 Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

≤ 0.04

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

17.0 – 19.0

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

3.00 – 4.00

UNIT

CAS NUMBER

7440-50-8

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7727-37-9; 17778-88-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

EN 10088-1: 2023 / Stainless steels - Part 1: List of stainless steels

Looking for full material performance data?

EN X3CrNiCu18-9-4 Physical Properties

Temperature

0 - 30°C 30 - 100°C 100 - 300°C ≥ 300°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 215 GPa

Unlock full details

Density

7.61 — 8.1 kg/dm³

Unlock full details

Poisson Coefficient

0.27 — 0.3

Unlock full details

This material has 652 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

EN X3CrNiCu18-9-4 Heat Treatments

(+AT) Solution annealed: 1000-1100°C, cooled sufficiently rapid in air or water.
Hot forming: 1200-900°C, air cooling; Solution annealing (+AT): 1000-1100°C, water or air cooling. If heat treatment is carried out in a continuous furnace, the upper part of the range specified should usually be preferred, or even exceeded. The lower end of the range specified for solution annealing should be aimed at the heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as lower limit for Mo-free steels.

EN X3CrNiCu18-9-4 Mechanical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Yield Strength, Rp0.2

val1 MPa

Unlock full details

Yield Strength, Rp1

val1 MPa

Unlock full details

Tensile Strength

450 — 2100 MPa

Unlock full details

Elongation, A

20 %

Unlock full details

Reduction of Area

val1 %

Unlock full details

Impact Energy

val1 J

Unlock full details

Brinell Hardness (HB)

≤ 215

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book a Demo

210 Cross References

45 Composition
86 Mechanical Properties
19 Physical Properties
3 Heat Treatment
1 Metallography
1 Machinability

13 Stress-Strain
- Formability
- Fatigue
- Fracture
- Creep

- Joints
- Coatings
156 Dimensions
- Tribology

- Corrosion
- Ageing
- Weatherability
- Irradiation

118 Total Suppliers