DIN 22Mn6 Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels

Country/Standard: Germany / DIN

Data updates

Latest Update: 2018-10

Total number of updates: 1

Update History

This material has 8864 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

DIN 22Mn6 Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

0.18 – 0.25

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

≤ 0.40

UNIT

CAS NUMBER

7440-47-3

CRITERIA

VALUE

≤ 0.30

UNIT

CAS NUMBER

7440-50-8

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7439-98-7

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-02-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

EN ISO 683-3: 2022 / Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels

Looking for full material performance data?

DIN 22Mn6 Physical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 210 GPa

Unlock full details

Density

7.67 — 7.86 kg/dm³

Unlock full details

Poisson Coefficient

0.27 — 0.3

Unlock full details

This material has 8864 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

DIN 22Mn6 Heat Treatments

Carburizing at 880-980°C (The carburizing temperature depends on the chemical composition of the steel, the mass of the product and the carburizing medium. If the steels are direct hardened, in general, a temperature of 950°C is not exceeded. For special procedures, for example under vacuum, higher temperatures (for example 1020-1050°C) are not unusual);

Direct and simple hardening at 830-870°C (The kind of quenching agent depends on, for example the shape of the products, the cooling conditions and the amount of furnace filling. If the steels are direct hardened and if there is a danger of distortion, they should be quenched from a temperature between the core-hardening and case-hardening temperatures);

Double hardening: Core-hardening at 880-920°C and Case-hardening at 780-820°C;

Tempering at 150-200°C (Time for tempering as a guide: 1h minimum).

DIN 22Mn6 Mechanical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Brinell Hardness (HB)

149 — 197

Unlock full details

Grain Size

Fine grain steel shall have an austenite grain size of 5 or finer. Sampling and sample preparation shall be as specified in ISO 643. The grain size shall be determined from a carburized specimen. Carburization shall be achieved by maintaining the specimen in carburizing powder at 950°C ± 10°C for 6 h. This is generally done by keeping the carburizing chamber at 950°C ± 10°C for 8 h, including a preheating period. In most cases, a carburized layer of approximately 1 mm is obtained.

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book a Demo

173 Cross References

9 Composition
3 Mechanical Properties
3 Physical Properties
1 Heat Treatment
- Metallography
- Machinability

- Stress-Strain
- Formability
- Fatigue
- Fracture
- Creep

83 Joints
- Coatings
- Dimensions
1 Tribology

8491 Corrosion
- Ageing
- Weatherability
- Irradiation

100 Total Suppliers