DIN 1.2419 Tool steels
Data updates
This material has 223 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.2419 Chemical Composition
DIN 17350: 1980 / Tool Steels; Technical Conditions of Delivery
Looking for full material performance data?
Free registration required • Instant access
DIN 1.2419 Physical Properties
Temperature
This material has 223 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.2419 Heat Treatments
- Soft annealing: Slowly heated at 710-750°C, held for several hours, slowly cooled, preferably in the furnace.
The soft annealing is most appropriate for machining and cold working and provides the most favorable initial structure for tool hardening.
Hardening: Preheated at 500-600°C and then heated faster at 800-830°C, quenched in oil.
Temperature of oil should be approx. 50°C. When quenching in aqueous salt solutions, the temperature of the quenching agent may rise to 100°C.
Hardening immediately after forging without cooling and annealing is inappropriate because of the risk of cracking.
Stress relief annealing: Slowly heated at 600-650°C, held for 1-2 hours, slowly cooled in the furnace. - Hardening (quencing in oil): 800-830°C; Tempering: 180°C
DIN 1.2419 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.2419 International Equivalent Materials
Showing 15 of 69 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 69 international equivalents?
See all 69 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 69Cross References
- 12Composition
- 7Mechanical Properties
- 60Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 8Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 62Total Suppliers