DIN 1.1335 Structural and constructional steels
Data updates
This material has 181 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1335 Chemical Composition
Pressure- and activity-retaining components of systems outside the primary circuit Part 1: Materials, KTA 3211.1, 2000
Looking for full material performance data?
Free registration required • Instant access
DIN 1.1335 Physical Properties
Temperature
This material has 181 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1335 Heat Treatments
- Normalization: 890 to 940°C, cooling in stationary air after the temperature has been reached over the entire cross section; Stress-relief annealing: 530 to 580°C; The heating and cooling rate, the temperature and the holding time shall be defined by the manufacturer and processor as a function of dimensions of the part, chemical composition and preceding heat treatments such that the requirements for mechanical and technological characteristics are met even allowing for subsequent heat treatments for the final condition of the complete part. Claddings shall also be taken into consideration (corrosion resistance, ductility).
DIN 1.1335 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.1335 International Equivalent Materials
Showing 1 of 5 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 5 international equivalents?
See all 5 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 5Cross References
- 14Composition
- 128Mechanical Properties
- 23Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 8Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers