DIN 1.0580 Structural and constructional steels
Data updates
This material has 1657 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.0580 Chemical Composition
DIN 2391-2: 1994 / Seamless precision steel tubes - Part 2: Technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
DIN 1.0580 Physical Properties
Temperature
This material has 1657 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.0580 Heat Treatments
- Cold finished (hard) (BK): Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation; Cold finished (soft) (BKW): The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding); Cold finished and stress-relieved (BKS): Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree; Annealed (GBK): The last cold forming process is followed by annealing in a controlled atmosphere; Normalized (NBK): The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.
- Normalized (+N): 900-960°C
DIN 1.0580 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.0580 International Equivalent Materials
Showing 15 of 804 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 804 international equivalents?
See all 804 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 804Cross References
- 71Composition
- 101Mechanical Properties
- 15Physical Properties
- 6Heat Treatment
- 4Metallography
- -Machinability
- 30Stress-Strain
- -Formability
- 2Fatigue
- -Fracture
- 6Creep
- 100Joints
- -Coatings
- 36Dimensions
- 2Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 480Total Suppliers