DIN 1.0211 Structural and constructional steels
Data updates
This material has 55 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.0211 Chemical Composition
DIN 2391-2: 1994 / Seamless precision steel tubes - Part 2: Technical delivery conditions
Looking for full material performance data?
Free registration required • Instant access
DIN 1.0211 Physical Properties
Temperature
This material has 55 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.0211 Heat Treatments
- Cold finished (hard) (BK): Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation; Cold finished (soft) (BKW): The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding); Cold finished and stress-relieved (BKS): Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree; Annealed (GBK): The last cold forming process is followed by annealing in a controlled atmosphere; Normalized (NBK): The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.
- Normalized: 910 to 940°C, afer reaching the temperature at total cross sectional, cooling in static air; Stress relieving: 530 to 580°C, holding period for wall thickness up to 15mm at least 15min and for 15 to 30mm at least 30min, cooling in static air; Cold forming at 580°C; Hot forming at 1050°C.
DIN 1.0211 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.0211 International Equivalent Materials
Showing 2 of 10 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 11 international equivalents?
See all 11 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 11Cross References
- 14Composition
- 21Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 2Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 2Total Suppliers