1.0034 (Germany / DIN) Material Properties
Other designations:
,
Material group:
Ferrous Alloys / Structural and constructional steels
Country/Standard:
Germany / DIN
Data updates
Latest Update: 2020-12
Total number of updates: 3
Update History:
2016-05
2014-05
Mechanical Properties
Temperature
Physical Properties
Temperature
Composition
CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
≥ 0.0200
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
≤ 0.1500
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Mn
VALUE
≤ 0.6000
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Nb
VALUE
val1
Full data access requires a free trial.
Sign Up Free
UNIT
%
CAS NUMBER
7440-03-1
CRITERIA
P
VALUE
val1
Full data access requires a free trial.
Sign Up Free
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data access requires a free trial.
Sign Up Free
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data access requires a free trial.
Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data access requires a free trial.
Sign Up Free
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
V
VALUE
val1
Full data access requires a free trial.
Sign Up Free
UNIT
%
CAS NUMBER
7440-62-2
DIN 2393-2: 1994 / Welded precision steel tubes - Part 2: Technical delivery conditions
Heat Treatments
- Welded and sized (BKM) - Bright drawn, no heat treatment after welding and sizing; Annealed (GBK) - After sizing, the tubes are annealed in a controlled atmosphere or under vacuum; Normalized (NBK) - The tubes are heat treated above the upper transformation point in a controlled atmosphere or under vacuum.
- Welded and cold sized (+CR1) - Normally not heat treated, but suitable for final annealing. After annealing or normalizing, the resulting mechanical properties meet the requirements specified for the delivery condition +A or +N, respectively.<br> Welded and cold sized (+CR2) - Not intended for heat treatment after the welding and sizing. If further heat treatment is applied, the resulting mechanical properties may be outside the specified requirements.
-
274 Cross References
-
49 Composition
-
62 Mechanical Properties
-
3 Physical Properties
-
3 Heat Treatment
-
- Metallography
-
- Machinability
-
- Stress-Strain
-
- Formability
-
- Fatigue
-
- Fracture
-
- Creep
-
- Joints
-
- Coatings
-
22 Dimensions
-
- Tribology
-
- Corrosion
-
- Ageing
-
- Weatherability
-
- Irradiation
-
207 Total Suppliers