CSN 19 426 Tool steels
Data updates
This material has 31 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
CSN 19 426 Chemical Composition
CSN 41 9426: 1968 / Cr-V tool steel 19 426
Looking for full material performance data?
Free registration required • Instant access
CSN 19 426 Physical Properties
Temperature
This material has 31 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
CSN 19 426 Heat Treatments
- Forging at 1080 to 800°C, cool slowly in calm air or dry sand, possibly with controlled cooling in the furnace; Annealing normalizing at 820 to 860°C, cool air; Soft annealing at 700 to 730°C, warm few hours (depending on size of object) is usually sufficient for 4 hours and cool slowly in the oven; Annealing to lower tension at 600 to 650°C, 1-2 h, warm and cool slowly; Hardening in water at 810 to 840°C or in oil at 830 to 860°C (smaller cross-section to a thickness of about 25 mm); Tempering at 100 to 300°C, cool in water or in air, the degree of tempering is governed necessary hardness and toughness tool.
CSN 19 426 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
CSN 19 426 International Equivalent Materials
Showing 7 of 9 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 9 international equivalents?
See all 9 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 9Cross References
- 8Composition
- 4Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 5Total Suppliers