ABS AB/A10 Bau- und Konstruktionsstähle
Datenaktualisierungen
Dieser Werkstoff verfügt über 32 Eigenschaften – hier wird nur ein Teil davon angezeigt.
Erhalten Sie Zugriff auf alle Werkstoffeigenschaften, einschließlich detaillierter Werte für verschiedene Temperaturen und Zustände.
Kostenlose Registrierung erforderlich • Sofortiger Zugriff
ABS AB/A10 Chemische Zusammensetzung
Rules for Materials and Welding, Part 2; Chapter 3 Section 7; Materials for Machinery, Boilers, Pressure Vessels, and Piping; Steel Machinery Forgings, American Bureau of Shipping, 2021
Suchen Sie nach vollständigen Daten für Werkstoffe?
Kostenlose Registrierung erforderlich • Sofortiger Zugriff
ABS AB/A10 Physikalische Eigenschaften
Temperatur
Dieser Werkstoff verfügt über 32 Eigenschaften – hier wird nur ein Teil davon angezeigt.
Erhalten Sie detaillierte physikalische Werte für verschiedene Temperaturen und Bedingungen.
Kostenlose Registrierung erforderlich • Sofortiger Zugriff
ABS AB/A10 Wärmebehandlung
- Forgings are to be normalized, quenched and tempered.
Cooling prior to heat treatment: After forging and before reheating for heat treatment, the forgings are allowed to cool in a manner to prevent injury and to accomplish transformation.
Annealing: The forgings are to be reheated to and held at the proper austenitizing temperature for a sufficient time to effect the desired transformation and then be allowed to cool slowly and evenly in the furnace until the temperature has fallen to about 455°C (850°F) or lower.
Normalizing: The forgings are to be reheated to and held at the proper temperature above the transformation range for a sufficient time to effect the desired transformation and then withdrawn from the furnace and allowed to cool in air.
Tempering: The forgings are to be reheated to and held at the proper temperature, which will be below the transformation range, but above 580°C (1075°F), and then to be cooled at a rate not exceeding 55°C (100°F)/h until temperature below 315°C (600°F) is reached.
Stress Relieving: Where heat treatment for mechanical properties is carried out before final machining, the forgings are to be stress relieved at a temperature not more than 55°C (100°F) below the previous tempering temperature, but in no case less than 550°C (1025°F). The cooling rate is not to exceed 55°C (100°F)/h until a temperature below 315°C (600°F) is reached. Stress relieving may be used to augment tempering, in order to make final adjustments to the mechanical properties. If the stress relief temperature is within 14°C (25°F) of the final tempering temperature or higher for quenched and tempered steel, mechanical tests are to be made to assure that these temperatures have not adversely affected the mechanical properties of the steel.
Retreatment: The manufacturer may re-heat treat the forging, but not more than three additional times.
ABS AB/A10 Mechanische Eigenschaften
Temperatur
Benötigen Sie vollständige mechanische Eigenschaften, um die richtige Wahl zu treffen?
Erhalten Sie vollständige Daten zu Festigkeit, Härte, Ermüdung und mehr.
Kostenlose Registrierung erforderlich • Sofortiger Zugriff
ABS AB/A10 Internationale Werkstoffäquivalente
4 von 10 Ergebnissen werden angezeigt.
Äquivalenzkategorien basieren auf dem Vergleich der chemischen Zusammensetzung und der mechanischen Eigenschaften — prüfen Sie die Eignung immer anhand der maßgeblichen Spezifikation für Ihre Anwendung.
Benötigen Sie die vollständige Liste von 10 internationalen Äquivalenten?
Sehen Sie alle 10 äquivalenten Werkstoffe mit detaillierter Zuordnung nach Norm, Hersteller und Äquivalenzkategorie.
Kostenlose Registrierung erforderlich • Sofortiger Zugriff
Optimieren Sie die Materialauswahl für Ihre Anwendung - Demo vereinbaren
- 10Querverweise
- 9Zusammensetzung
- 9Mechanische Eigenschaften
- 3Physikalische Eigenschaften
- 1Wärmebehandlung
- -Metallographie
- -Zerspanbarkeit
- -Spannung-Dehnung
- -Umformbarkeit
- -Ermüdung
- -Fraktur
- -Schleicher
- -Verbindungen
- -Beschichtungen
- -Abmessungen
- -Tribologie
- -Korrosion
- -Alterung
- -Witterungsbeständigkeit
- -Bestrahlung
- -Gesamtzahl der Lieferanten