Compacted Graphite Iron: Part One

Sažetak:

Compacted graphite iron (CGI) along with lamellar graphite iron and spheroidal graphite iron define the three main classes of cast iron according to morphology.
CGI displays very useful properties for a range of engineering applications with the tensile strength and elastic modulus being considerably higher than grey cast irons (75% and 35% respectively).

Cast iron is a family of alloys divided into several classes, defined by their graphite morphology and metallic matrix structure. There are mainly three different classes of cast irons classified by their graphite morphology; lamellar graphite iron (LGI), compacted graphite iron (CGI) and spheroidal graphite iron (SGI). LGI, commonly known as gray iron or flake graphite iron has a stable eutectic with graphite shaped as lamellas or flakes, see Figure 2a. In Figure 2c, SGI is illustrated.

It is also called ductile iron or nodular cast iron and has a stable eutectic with the graphite shaped as spheroids or nodules. The third class of cast iron is CGI which has a stable eutectic with a worm‐like shaped graphite, also called compacted graphite or vermicular graphite, see Figure 2b.



Figure 2: Microstructure of (a) gray iron, (b) CGI and (c) ductile iron

Compacted graphite iron (CGI) can be considered as a promising engineering material which contains graphite particles in compacted (vermicular) form. CGI shows intermediate mechanical and physical properties between grey and ductile irons. For instance, it possesses 70% higher tensile strength, 35% higher elastic modulus and nearly double fatigue strength of grey cast irons.

Thus it includes an optimal combination of different properties like strength, ductility and thermal conductivity which have lead to a distinctive attention during recent years. Because of these properties, CGI found a significant role in production of automotive engines, machine parts and also many different applications. Nowadays, several methods of casting of CGI products have been developed, trying to find the best method to have a precise control on the final microstructure.

The ISO 16112 international standard for CGI provides for five grades of CGI, ranging from a minimum tensile strength of 300 MPa to 500 MPa (GJV 300 to GJV 500). For each of these grades, the microstructure specification requires a nodularity range of 0-20%.

Pearlite content can be chosen to suit the application, with the GJV 300 Grade being fully ferritic and the GJV 500 Grade being fully pearlitic. Flake graphite is inadmissible. As with grey iron and ductile iron, specific alloying elements can be added to enhance high temperature strength, wear resistance or other properties.

A full range of heat treatments, including austempering, can also be applied. Typical chemistry ranges are provided below, although the chemical specification of CGI castings is subordinate to mechanical properties.



Figure 1: a) CGI microstructure containing 10% nodularity and b) Deep-etched SEM micrographs show the complex coral-like graphite in three-dimensions



Table 1: Mechanical and Physical properties of 10% Nodularity CGI – ISO 16112


References

1. A.Berglund: Criteria for Machinability Evaluation of Compacted Graphite Iron Materials, Doctoral thesis, KTH Royal Institute of Technology, Department of Production Engineering Machine and Process Technology, Stockholm, Sweden 2011, ISSN 1650-1888, ISBN 978-91-7501-159-2;

2. H.H. Hooshyar: Thermal analysis of compacted Graphite Iron, Chalmers University of Technology, Diploma work no 60/2011 Department of Materials and Manufacturing Technology, SE-412 96 Gothenburg, Sweden;

3. Compacted Graphite Iron-Material Data Sheet, SinterCast, Supermetal CGI, www.sintercast.com, Accessed March 2017;

Pretražite bazu znanja

Unesite reč za pretragu:

Pretražite prema

Kompletan tekst
Ključne reči

Naslovi
Sažetak

U Total Materia bazi se nalazi više hiljada metalografskih snimaka poreklom iz različitih zemalja i standarda.

Korišćenjem kartice Metalografija u meniju možete izabrati materijal koji Vas zanima iz liste materijala koji sadrže metalografske podatke.

Metalografske podatke možete naći i kroz našu standardnu Brzu pretragu, a svi dostupni podaci biće prikazani listom podgrupa za odabrani materijal.

Jednostavno unesite oznaku materijala u polje Materijal, odaberite standard, ako je poznat, pa kliknite Pretražite.

solution img

Opšte informacije o mikrostukturi možete videti zajedno sa odgovarajućim hemijskim sastavom za odabrani materijal.

solution img

Za određene materijale postoje metalogafski snimci pri različitim uvećanjima.

Možete odabrati druga stanja iz padajućeg menija Izaberite stanje da biste videli metalografske snimke iz drugih procesa i pri različitim vidovima termičke obrade.

solution img

solution img

Imate priliku da isprobate Total Materia bazu podataka. Pozivamo Vas da se pridružite zajednici od preko 150,000 registrovanih korisnika kroz Total Materia Besplatan demo.