This article explores the key parameters derived from true stress-strain curves in materials testing. It details the calculation and significance of various measurements including true stress at maximum load, true fracture stress and strain, true uniform strain, and true local necking strain. The content focuses on the mathematical relationships between these parameters and their practical applications in materials science and engineering, providing essential formulas and explanations for each measurement type.
The true stress-strain curve provides several critical parameters for materials analysis:
The true stress at maximum load corresponds to the true tensile strength. Necking typically initiates at maximum load when the true stress equals the flow curve's slope. For a specimen with cross-sectional area Au, the true stress (σu) and true strain (εu) at maximum load relate to the ultimate tensile strength through:
Eliminating Pmax yields
(1)
True fracture stress is calculated by dividing the load at fracture by the cross-sectional area at fracture. Note: This measurement typically requires correction for the triaxial stress state present at fracture. Due to limited data availability for such corrections, reported values may contain some degree of error.
The true fracture strain (εf) represents the maximum true strain before fracture, calculated using:
(2)
For cylindrical specimens, the reduction of area (q) relates to true fracture strain through:
(3)
True uniform strain (εu) measures the strain up to maximum load, calculated using either:
(4)
This parameter is particularly valuable for estimating metal formability from tension test results.
The local necking strain (εn) measures the deformation from maximum load to fracture:
(5)
Total Materia Horizon には、金属および非金属材料の豊富な応力-ひずみ曲線データが含まれています。真応力・工学的応力の両方が、異なるひずみ速度・熱処理・作業温度に応じて収録されています。
Total Materia Horizonの無料テストアカウントを開設して、120カ国以上、50万人を超えるユーザーのコミュニティに参加しましょう！