SAE Inconel 625 Nickel Alloys

Material group: Nonferrous Alloys / Nickel Alloys
Country / Standard: United States / SAE

Data updates

Latest Update: 2022-12
Total number of updates: 13
Update History

This material has 890 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE Inconel 625 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
0.4000
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
C
VALUE
0.10
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Co
VALUE
1
UNIT
%
CAS NUMBER
7440-48-4
CRITERIA
Cr
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Fe
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6

SAE J 470: 1976 / Wrought Nickel and Nickel-Related Alloys

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE Inconel 625 Physical Properties

Temperature

PROPERTY / VALUE
Compression Modulus
205 GPa
Unlock full details
Full data available with free access View Complete Material Data
Modulus of Elasticity
185 — 207 GPa
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
val1
Full data available with free access View Complete Material Data
W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
val1
Full data available with free access View Complete Material Data
Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Heat Capacity
val1
Full data available with free access View Complete Material Data
J/(kg∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Melting Temperature
val1
Full data available with free access View Complete Material Data
°C
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data
Shear Modulus
val1
Full data available with free access View Complete Material Data
GPa
Unlock full details
Full data available with free access View Complete Material Data

This material has 890 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

SAE Inconel 625 Heat Treatments

  • Sheet and strip: Hot or cold rolled, annealed, and, unless annealing is performed in an atmosphere yielding a bright finish, descaled;
    Plate: Hot rolled, annealed, and, unless annealing is performed in an atmosphere yielding a bright finish, descaled;
    Product shall be annealed by heating in a suitable atmosphere to a temperature not lower than 870°C (1600°F), holding at the selected temperature within ± 15°C (± 25°F) for a time commensurate with section thickness, and cooling at a rate equivalent to an air cool or faster, except when continuous heat treating is used
  • Solution heat treated: Heating in a suitable atmosphere to a temperature not lower than 1093 ± 14°C (2000 ± 25°F), holding at heat for a time commensurate with section thickness, and cooling at a rate equivalent to an air cool or faster.
    Product may be given a subsequent stabilization treatment at a temperature not lower than 982°C (1800°F) to increase resistance to sensitization.

SAE Inconel 625 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
689 — 1104 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
110 — 287
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Compression Yield Strength
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data
Grain Size
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

SAE Inconel 625 International Equivalent Materials

Showing 15 of 192 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
N06625
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
SB-622 N06250
STANDARD
ASME
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
SIMALLOY 625
STANDARD
SAE
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Official
MATERIAL
B 622 N06250
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
F 468AC Ni625
STANDARD
ASTM
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
Inconel alloy 625
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
N06250
STANDARD
UNS
COUNTRY / PRODUCER
United States
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
NS336
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
0Cr20Ni65Mo10Nb4
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
GH 3625
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
GH625
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
NS3306
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
H03306
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
H06625
STANDARD
GB
COUNTRY / PRODUCER
China
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
IN625
STANDARD
PROPRIETARY
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 192 international equivalents?

See all 192 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 192Cross References
  • 73Composition
  • 146Mechanical Properties
  • 70Physical Properties
  • 3Heat Treatment
  • 14Metallography
  • 2Machinability
  • 67Stress-Strain
  • 17Formability
  • 25Fatigue
  • -Fracture
  • 1Creep
  • 7Joints
  • -Coatings
  • 95Dimensions
  • 8Tribology
  • 6Corrosion
  • 2Ageing
  • -Weatherability
  • 32Irradiation
  • 130Total Suppliers