SAE 7019 Aluminium Alloys
Data updates
This material has 28 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 7019 Chemical Composition
SAE AMS 4409A: 2021 / Aluminum Alloy, Plate 4.0Zn - 2.0Mg - 0.32Mn (7019-T651) Solution Heat Treated, Stress Relieved, and Artificially Aged
Looking for full material performance data?
Free registration required • Instant access
SAE 7019 Physical Properties
Temperature
This material has 28 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 7019 Heat Treatments
- Solution heat treatment: 458-468°C (855-875°F). Aging shall be performed at a specific temperature and time as required to meet desired properties.
- Annealing: Soak for 2 to 3 hours at 404°C (760°F ); cool to 204°C (400°F) or lower, reheat to 232°C (450°F), and soak for 4 hours; cooling rate optional.
Solution heat treating temperature (for plate): 458-468°C (855- 875°F) , followed by an air cool and quenched.
SAE 7019 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 7019 International Equivalent Materials
Showing 3 of 3 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 3 international equivalents?
See all 3 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 3Cross References
- 11Composition
- 9Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- -Total Suppliers