UNI P-AlMn1.2 Aluminium Alloys

Material group: Nonferrous Alloys / Aluminium Alloys
Country / Standard: Italy / UNI
Indicative price:

Data updates

Latest Update: 2019-05
Total number of updates: 3
Update History
2016-06 2014-03

This material has 363 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlMn1.2 Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
Al
VALUE
Remainder
UNIT
%
CAS NUMBER
7429-90-5
CRITERIA
Cu
VALUE
≤ 0.1
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Fe
VALUE
≤ 0.5
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Fe+Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Mg
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-95-4
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Other
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
Ti
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-32-6
CRITERIA
Zn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-66-6

UNI 3568: 1955 / Primary Aluminium - Manganese alloy for plastic processing (Mn 1.2%)

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlMn1.2 Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
68.6 — 79 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.0345 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
val1
Full data available with free access View Complete Material Data
kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Thermal Conductivity
192.464 — 193 W/(m∙°C)
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 363 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

UNI P-AlMn1.2 Heat Treatments

  • Full annealing ( R ) for 2 to 4 hours at the temperature range of 450 - 500 °C. From a very hardened material (H60) it is possible to obtain a less hardened material ( H20- H30) through partial annealing at 200 - 220 °C for 4 - 6 hours. Hot working range at 450 - 520 °C
  • Full Annealing from 450 to 500°C for 1 to 2h to scheme with subsequent cooling in ambient air (or in the oven). They can follow operations of flattening, straightening and ironing, for reasons of dimensional tolerances, which have a slight strain hardening.
    H12, H14, H16 and H18 - work hardened states provided for rolled and drawn, obtained by performing the material, in an intermediate stage of processing, the complete annealing (O) followed by a final cold processing plastic, extrusion lamination, involving different work hardening equal to about 18% (H12), 37% (H14), 55% (H16) and 75% (H18).
    H22, H24, H25, H26 - United recovery (crystalline rearrangement) provided for rolled and / or drawn, obtained by performing on the same semi-finished very hard drawn (H16, H18) a partial annealing from 230 to 260°C for 2 to 6h to hold at followed by cooling in ambient air (H16 ->H24, H22, H18 -> H26, H25, H24).
    H112 - Raw extrusion of the hot rolling. They can follow operations of flattening, straightening and ironing, for reasons of dimensional tolerances, which have a slight strain hardening.

UNI P-AlMn1.2 Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
78 — 245 MPa
Unlock full details
Full data available with free access View Complete Material Data
Brinell Hardness (HB)
≥ 25
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
1 — 45 %
Unlock full details
Full data available with free access View Complete Material Data
Impact Strength
val1
Full data available with free access View Complete Material Data
kJ/m²
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
val1
Full data available with free access View Complete Material Data
MPa
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

UNI P-AlMn1.2 International Equivalent Materials

Showing 15 of 115 results.

MATERIAL
STANDARD
COUNTRY / PRODUCER
EQUIVALENCE CATEGORY
MATERIAL
3103
STANDARD
AFNOR NF
COUNTRY / PRODUCER
France
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
NG 3
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
L 59
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
L 60
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
L 61
STANDARD
B.S.
COUNTRY / PRODUCER
United Kingdom
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AlMn1
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AL-P3106
STANDARD
EN
COUNTRY / PRODUCER
European Union
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
3103
STANDARD
ISO
COUNTRY / PRODUCER
International
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 3103P
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
A 3103T
STANDARD
JIS
COUNTRY / PRODUCER
Japan
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AlMn1
STANDARD
KS
COUNTRY / PRODUCER
Korea
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
3103
STANDARD
KS
COUNTRY / PRODUCER
Korea
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
AlMn
STANDARD
ONORM
COUNTRY / PRODUCER
Austria
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
L-3811
STANDARD
UNE
COUNTRY / PRODUCER
Spain
EQUIVALENCE CATEGORY
Composition 100%
MATERIAL
Al-1Mn
STANDARD
UNE
COUNTRY / PRODUCER
Spain
EQUIVALENCE CATEGORY
Composition 100%

Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.

Need the full list of 115 international equivalents?

See all 115 equivalent grades with detailed mapping by standard, producer and equivalence category.

View All Equivalents ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 115Cross References
  • 21Composition
  • 124Mechanical Properties
  • 21Physical Properties
  • 2Heat Treatment
  • -Metallography
  • -Machinability
  • 33Stress-Strain
  • 1Formability
  • -Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 46Total Suppliers