S0050A/NAAMS (PROPRIETARY) Material Properties

Material group: Ferrous Alloys / Cast irons
Country/Standard: PROPRIETARY

Data updates

Latest Update: 2018-04
Total number of updates: 1
Update History:

Mechanical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
MPa view details
Tensile Strength 585 MPa view details
Elongation, A 16 % view details
Brinell Hardness (HB) 170 — 229 view details
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
ksi view details
Tensile Strength 84.8 ksi view details
Elongation, A 16 % view details
Brinell Hardness (HB) 170 — 229 view details

Physical Properties

Since direct data is not available in the original source, register for a free trial to explore similar or equivalent materials having these properties.

Register Now

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.4 – 0.5
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
0.8 – 1.1
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Mn
VALUE
0.9 – 1.2
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
P
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3
CRITERIA
V
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-62-2

Index for stamping dies cast materials / NAAMS Global Standard Components - Stamping / 2015 / Available at: www.naamsstandards.org

Heat Treatments

  • Castings shall be annealed by heating to 872-925°C and holding for a minimum of one hour plus one hour per 25 mm of section thickness using maximum section thickness. Castings shall be funace cooled to 560°C at a rate not to exceed 45°C per hour, then air cooled at room temperature.