C25 (Japan / JIS) Material Properties

Material group: Ferrous Alloys / Structural and constructional steels
Country/Standard: Japan / JIS

Data updates

Latest Update: -
Total number of updates: 0
Update History:
-

Mechanical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
MPa view details
Tensile Strength 440 — 700 MPa view details
Elongation, A 5 % view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
J view details
Brinell Hardness (HB) 156 view details
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
ksi view details
Tensile Strength 63.8 — 101.5 ksi view details
Elongation, A 5 % view details
Impact Energy val1
Full data access requires a free trial. Sign Up Free
ft·lb view details
Brinell Hardness (HB) 156 view details

Physical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Modulus of Elasticity 190 — 210 GPa view details
Density 7.67 — 7.86 kg/dm³ view details
Poisson Coefficient 0.27 — 0.3 view details
Modulus of Elasticity 27.6 E+03 — 30.5 E+03 ksi view details
Density 0.277 — 0.284 lb/in³ view details
Poisson Coefficient 0.27 — 0.3 view details

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.22 – 0.29
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Mn
VALUE
0.40 – 0.70
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
P
VALUE
≤ 0.045
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3

G 7105: 2000 / Heat-treatable steels, alloy steels and free-cutting steels - Part 18: Bright products of unalloyed and low alloy steels

Heat Treatments

  • Normalizing: 880-920°C (1/2 hour); Water quenching: 860-900°C, Tempering: 550-660°C (1 hour).
  • TC+TA - cold drawn and annealed to maximum hardness requirements. P+TA - peeled and annealed to maximum hardness requirements. G+TA - ground and annealed to maximum hardness requirements. TC+TN - cold drawn and normalized. P+TN - peeled and normalized. G+TN - ground and normalized. TC+TQ+TT - cold drawn and quenched + tempered. P+TQ+TT - peeled and quenched + tempered. G+TQ+TT - ground and quenched + tempered. Hardening: 860-900°C (1/2 hour), water quench; Tempering: 550-660°C (1 hour); Normalizing: 880-920°C.