CSN X7CrNiAl17-7 Stainless steels
Data updates
This material has 677 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
CSN X7CrNiAl17-7 Chemical Composition
EN 10088-2: 2024 / Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Looking for full material performance data?
Free registration required • Instant access
CSN X7CrNiAl17-7 Physical Properties
Temperature
This material has 677 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
CSN X7CrNiAl17-7 Heat Treatments
- Delivery condition: Solution treated; 1025 ≤ T ≤ 1055°C for at least 30 min; air cooled (AC) or oil quenched (OQ).
Use condition: Solution treated and precipitation hardened; 740 ≤ T ≤ 780°C for at least 90 min + cool to T ≤ 20°C within 1 h; hold for 30 min + 550 ≤ T ≤ 580°C for at least 90 min; air cool (AC). - Heat treated at 450-490°C; Duration: <= 1h; Air cooling; The optimum heat treatment conditions may be very different. The spring manufacturer shall choose those conditions answering the purpose; The heat treatment data refer to compression springs, torsion and tension (springs without initial tension).
CSN X7CrNiAl17-7 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
CSN X7CrNiAl17-7 International Equivalent Materials
Showing 15 of 241 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 241 international equivalents?
See all 241 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 241Cross References
- 74Composition
- 127Mechanical Properties
- 26Physical Properties
- 8Heat Treatment
- -Metallography
- -Machinability
- 3Stress-Strain
- 2Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 10Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 186Total Suppliers