X3CrNiCuMo17-11-3-2 (Czech Republic / CSN) Material Properties

Other designations:
Material group: Ferrous Alloys / Stainless steels
Country/Standard: Czech Republic / CSN

Data updates

Latest Update: 2020-03
Total number of updates: 5
Update History:
2019-09 2018-01 2015-02 2015-01

Mechanical Properties

Temperature

0 - 30°C
PROPERTY / VALUE
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
MPa view details
Tensile Strength 450 — 850 MPa view details
Elongation, A 20 % view details
Reduction of Area val1
Full data access requires a free trial. Sign Up Free
% view details
Brinell Hardness (HB) ≤ 215 view details
Yield Strength, Rp0.2 val1
Full data access requires a free trial. Sign Up Free
ksi view details
Tensile Strength 65.3 — 123.3 ksi view details
Elongation, A 20 % view details
Reduction of Area val1
Full data access requires a free trial. Sign Up Free
% view details
Brinell Hardness (HB) ≤ 215 view details

Physical Properties

Temperature

0 - 30°C
30 - 100°C
100 - 300°C
≥ 300°C
PROPERTY / VALUE
Modulus of Elasticity 190 — 215 GPa view details
Modulus of Elasticity val1
Full data access requires a free trial. Sign Up Free
GPa view details
Modulus of Elasticity val1
Full data access requires a free trial. Sign Up Free
GPa view details
Modulus of Elasticity val1
Full data access requires a free trial. Sign Up Free
GPa view details
Density 7.61 — 8.1 kg/dm³ view details
Poisson Coefficient 0.27 — 0.3 view details
Modulus of Elasticity 27.6 E+03 — 31.2 E+03 ksi view details
Modulus of Elasticity val1
Full data access requires a free trial. Sign Up Free
ksi view details
Modulus of Elasticity val1
Full data access requires a free trial. Sign Up Free
ksi view details
Modulus of Elasticity val1
Full data access requires a free trial. Sign Up Free
ksi view details
Density 0.275 — 0.293 lb/in³ view details
Poisson Coefficient 0.27 — 0.3 view details

Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
≤ 0.04
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
16.5 – 17.5
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Cu
VALUE
3.0 – 3.5
UNIT
%
CAS NUMBER
7440-50-8
CRITERIA
Mn
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
N
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7727-37-9; 17778-88-0
CRITERIA
Ni
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data access requires a free trial. Sign Up Free
UNIT
%
CAS NUMBER
7440-21-3

EN 10088-1: 2023 / Stainless steels - Part 1: List of stainless steels

Heat Treatments

  • Hot forming: 1150-900°C, air cooling; Solution annealing (+AT): 1000-1100°C, water or air cooling. If heat treatment is carried out in a continuous furnace, the upper part of the range specified should usually be preferred, or even exceeded. The lower end of the range specified for solution annealing should be aimed at the heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 1000°C for steels with Mo contents up to 3 %.
  • Hot working (air cooling): 1150-900°C; +AT - Solution annealing (air or water cooling): 1000-1100°C.<br><br>Hot formed conditions:<br>1U - Hot formed, not heat treated, not descaled.<br>1C - Hot formed, heat treated, not descaled. <br>1E - Hot formed, heat treated, mechanically descaled. <br>1D - Hot formed, heat treated, pickled, coated (optional).<br>1X - Hot formed, heat treated, rough machined.<br>1G - Hot formed, heat treated, descaled, rough machined or shaved in the case of rod. <br>Cold processed conditions:<br>2H - Finishes 1E, 1D or 1X, cold processed, coated (optional).<br>2D - Finish 2H, heat treated, pickled and skin- passed (optional), coated (optional). <br>2B - Finishes 1E, 1D or 1X, cold processed, mechanically smoothed. <br>2G - Finishes 2H, 2D or 2B, centreless ground, mechanically smoothed (optional). <br>P - Finishes 2H, 2D, 2B or 2G, specular polishing.