PN 28Mn6 Structural and constructional steels
Data updates
This material has 629 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PN 28Mn6 Chemical Composition
EN 10083-1: 1991 / Quenched and tempered steels - Part 1: Technical delivery conditions for special steels (includes amendment A1:1996)
Looking for full material performance data?
Free registration required • Instant access
PN 28Mn6 Physical Properties
Temperature
This material has 629 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PN 28Mn6 Heat Treatments
- Hardening: 830-870°C (Temperatures at the lower end of the range are generally used for water, and those at the upper end for oil quenching; Time for austenitizing as a guide: at least 30 min.);
Quenching agent: Water or oil (Other quenching agents such as synthetic quenchants may also be used.);
Tempering: 540-680°C (Time for tempering as a guide: at least 1h.);
End quench test austenitizing: 850 ± 5°C (Time for austenitizing as a guide: 30-35 min.). - Annealing at 650-700°C; Normalizing at 850-890°C; Hardening in polymer or water at 820-850°C (the samples can be quenched qualifying it from any polymer, provided the cooling rate does not exceed 50% of the rate of cooling in water at 20°C. After remission of cooling air) and in oil at 830-860°C; Tempering at 540-640°C.
PN 28Mn6 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PN 28Mn6 International Equivalent Materials
Showing 15 of 218 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 218 international equivalents?
See all 218 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 218Cross References
- 66Composition
- 158Mechanical Properties
- 3Physical Properties
- 12Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- 10Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 6Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 156Total Suppliers