DIN GX2CrNiMoCuN25-6-3-3 Cast steels
Data updates
This material has 423 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN GX2CrNiMoCuN25-6-3-3 Chemical Composition
EN 10283: 2019 / Corrosion resistant steel castings
Looking for full material performance data?
Free registration required • Instant access
DIN GX2CrNiMoCuN25-6-3-3 Physical Properties
Temperature
This material has 423 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN GX2CrNiMoCuN25-6-3-3 Heat Treatments
- Solution annealing (+AT) at 1120 to 1150°C and quenching in water.
After solution annealing at high temperature, castings may be cooled to a temperature between 1040°C and 1010°C prior to water quenching to prevent cracks and to improve corrosion resistance.
After solution annealing + quenching in water, precipitation hardening is possible by treatment at 480°C to 510°C, while ductility, impact energy and corrosion resistance are only slightly lowered. - +AT: Solution annealing at 1120 - 1150°C, cooling in water. After a high temperature solution annealing, the castings may be cooled from 1040°C to 1010°C before being quenched in water to prevent cracks and to improve corrosion resistance.
DIN GX2CrNiMoCuN25-6-3-3 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN GX2CrNiMoCuN25-6-3-3 International Equivalent Materials
Showing 15 of 93 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 93 international equivalents?
See all 93 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 93Cross References
- 41Composition
- 21Mechanical Properties
- 6Physical Properties
- 4Heat Treatment
- 3Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 28Joints
- -Coatings
- 136Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 91Total Suppliers