DIN 1.1525 Tool steels
Data updates
This material has 373 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1525 Chemical Composition
EN ISO 4957: 2018 / Tool steels
Looking for full material performance data?
Free registration required • Instant access
DIN 1.1525 Physical Properties
Temperature
This material has 373 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.1525 Heat Treatments
- Normalizing: Heated at 800°C.
Soft annealing: Slowly heated at 680-710°C for 4 hours, slowly cooled, if possible in the furnace (to at least 500°C).
Hardening in water: Slowly heated at 780-810°C, quenched in water. The quenching water should be 20-30°C and not colder than 20°C.
Hardening in oil: Slowly heated at 800-830°C, oil quenched.
Stress relief annealing: Slowly heated at 600-650°C for 1-2 hours, slowly cooled in furnace. - Austenitized at 790 +/- 10°C and water quenched.
Tempered at 180 +/- 10°C
DIN 1.1525 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.1525 International Equivalent Materials
Showing 15 of 174 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 174 international equivalents?
See all 174 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 174Cross References
- 15Composition
- 14Mechanical Properties
- 4Physical Properties
- 7Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 14Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 145Total Suppliers